99久久国产综合精品女同图片&亚洲一区无码中文字幕不卡&97国产婷婷综合在线电影&99久久国产高清观看
    <dl id="v6yxh"></dl>
      1. <progress id="v6yxh"></progress>

          <track id="v6yxh"></track>

        1. <nobr id="v6yxh"></nobr>
        2. <bdo id="v6yxh"><optgroup id="v6yxh"></optgroup></bdo>
          1. 首頁 產品中心 柴油車煙度計

            PRODUCTS CENTER
            柴油車煙度計
            HPC601便攜式不透光煙度計



            主要功能特點:

            便攜式一體化結構設計;
            采用分流式取樣技術、柴油機加速、減速和穩速時均可測量煙度;
            數據自動線性化處理,可顯示不透光度N、光吸收系數K和對應濾紙式煙度值SF;
            高亮度數碼顯示;
            采用“空氣幕”技術保護光學系統免受污染;
            檢測室自動恒溫控制,可防冷凝而影響測試精度;
            附自動時間顯示,可選配轉速測量和油溫測量;
            出現故障自動診斷顯示所在單元;
            配內置打印機或藍牙、RS232、模擬接口。
            符合ISO11614和GB3847-2018技術要求。


            主要技術參數:

            測量范圍            不透光度N:0~99.9%(相當煙度值0~10FSN)
            光吸收系數K:0~16.06m-1
            轉速:0-9990rpm     油溫: 0-150℃
            示值誤差            ≤±2%(測量值)
            穩 定 性            自動校零,量矩漂移≤±1%/4h
            重 復 性            重復誤差≤±1%
            分 辨 率            N為0.1%, K為0.01m-1 ,轉速為10rpm,油溫為0.1℃
            輸出方式           數字直讀顯示,可附打印機打印煙濃度(暗度)最大值,測試
            時間、日期等??筛浇涌谂c計算機聯網
            測量室溫度        70℃(自動恒溫),當溫度誤差≥±10%時,溫度及錯誤指示燈亮
            環境條件           溫度-5~50℃,相對濕度≤90%
            電      源            AC100-240V 50/60Hz 消耗功率150VA
            外形尺寸          (含支架)160mm(深)×400mm(寬)×480mm(高)
            重      量            約8kg

            Main Features:

            ◆Integrated Structural Design
            ◆Adopted a triage-type sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the smoke
            ◆Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-type smoke SF
            ◆High-brightness digital display;
            ◆Use of "air curtain" technology to protect the optical system from pollution
            ◆Automatic detection of room temperature control, anti-condensation can affect the testing accuracy
            ◆Automatically attached to the time display, and optional speed measurement and oil temperature measurement
            ◆Show where the failure of automatic diagnosis unit;
            ◆Equipped with built-in printer (or Bluetooth / RS232 interface)

            ◆In line with ISO11614 and GB3847-2005 technical requirements.

            Main technical parameters:

            Test ScopeNo light transmission N:0100% (equivalent to smoke value 0~10FSN)

            Light absorption coefficient K:016.06 m-1

            RPM09990rpm OIL TEMP: 0150℃

            Indication error: ≤±2% ( measured value)

            Stability:moment drift≤±1%/4H

            Repeatability ≤±1%

            Resolution: N:0.1%, K:0.01m-1 ,RPM:10rpm, OIL TEMP:0.1℃

            Output mode:digital direct reading, can be attached to the printer to print the smoke concentration ( darkness) maximum value, test time, date. Can interface with computer networking

            The measurement chamber temperature:

            70 ℃ (automatic), when the temperature error of ± 10%, temperature and error indicator light

            And-use temperature: -5~50°C, Relative humidity: 90%

            Power: AC100~240V 50/60Hz or DC12V, Power consumption: 150VA

            Dimensions ( including bracket) :160 ( L)×400(W)×480 (H)mm

            Weight: 8kg

            上一篇:暫無    下一篇: HPC606便攜式不透光煙度計

            99久久国产综合精品女同图片&亚洲一区无码中文字幕不卡&97国产婷婷综合在线电影&99久久国产高清观看
              <dl id="v6yxh"></dl>
              1. <progress id="v6yxh"></progress>

                  <track id="v6yxh"></track>

                1. <nobr id="v6yxh"></nobr>
                2. <bdo id="v6yxh"><optgroup id="v6yxh"></optgroup></bdo>